AR(Acoustic Research) AR Amp

AR(Acoustic Research) AR Amp	147,000 yen(1966 release)
	With a case: 155,000 yen(1968 release)

Description 　 The solid-state Integrated Amplifier of AR. In the test report of the February, 1968 issue of a high fidelity magazine, it was published saying, "It more easily than the characteristic of AR announcement exceeded the test result", and popularity was acquired.

Rating of a mode Form Integrated Amplifier Output (r. per m.s and channel) More than 60W (4ohms) 50W (8ohms) 30W (16ohms) Frequency response 20Hz-20kHz±1dB Harmonic distortion 0.5% (20Hz - 20kHz) IM distortion 0.25% (at the time of 60:7kHz=4:1, a Phono input, and an Output power) Signal to noise ratio Phono:57dB Tuner, Tape: 75dB Dumping factor 8-20 (4ohms) 16-40 (8ohms) 32-80 (16ohms) Input sensitivity Phono: 2-5mV sensitivity adjustment is possible. Tuner, Tape: 200mV Tone control Adjustment according to height and right and left is possible at a same axle type. Mode stereo, mono, null Power consumption 125W At the time of the maximum except take-off: 500W Dimensions Width 385x height 115x depth of 255mm